Painting skirting boards might seem like a tricky job, especially when there’s carpet to consider. However, with careful preparation and a patient approach, it can be accomplished effectively and without any mess. This guide will walk you through the process of painting skirting boards with carpet in place, ensuring a neat and professional finish.

Materials You’ll Need

Before you start, ensure you have all the necessary materials to hand. These might include:

  1. A good quality paintbrush (around 2 inches wide is ideal)
  2. A tin of your chosen paint
  3. Masking tape
  4. A paint kettle or small container
  5. A dust sheet or old bedsheet
  6. A decorator’s tool or scraper
  7. Protective gloves
  8. Old newspapers or cardboard

Step 1: Prepare the Area

Start by vacuuming the carpet around the skirting boards to remove any dust or debris. This is important as dust could stick to your paintbrush and end up on your freshly painted skirting boards.

Step 2: Protect the Carpet

Next, you’ll want to protect your carpet from any potential paint spills. One effective method is to use a dust sheet or old bedsheet. Lay it out along the skirting boards, ensuring all areas of the carpet are covered.

Step 3: Masking the Carpet

Now it’s time to use your masking tape. Starting at one end of the skirting board, push the edge of the tape beneath the edge of the skirting board using the decorator’s tool or scraper. This should create a barrier between the carpet and the skirting board. Be sure to take your time with this step to ensure a neat edge and a well-protected carpet.

Step 4: Begin Painting

Pour some of your chosen paint into the paint kettle or small container. This is more convenient than carrying around a large tin of paint and reduces the risk of spills. Dip your brush into the paint and wipe off the excess on the edge of the container. Now, you’re ready to start painting. Apply the paint smoothly and evenly, working in small sections to maintain control.

Step 5: Let It Dry and Clean Up

Once you’ve painted all of the skirting boards, it’s time to let the paint dry. Be patient and avoid the temptation to touch the skirting boards to check if they’re dry. Once they’re fully dry, carefully peel off the masking tape.

A Few Additional Tips

For a professional finish, consider applying a primer and two top coats of paint to your skirting boards. Remember to allow each coat to dry fully before applying the next one. Moreover, if you’re painting skirting boards in a room with a lot of natural light, try to avoid painting in direct sunlight, as this can cause the paint to dry too quickly and potentially leave brush marks.

In conclusion, painting skirting boards with carpet in place may require a bit of patience and careful preparation. Still, with the right materials and approach, you can achieve a neat and professional-looking finish. Happy painting!